How to get hansonled led strip datasheet?

Why the Datasheet Matters

Every lighting project has unique constraints: voltage availability, brightness targets, waterproofing requirements, and controller compatibility. A datasheet answers the technical questions that product photos and short descriptions cannot. Without it, you risk ordering a strip that draws more current than your power supply can deliver, emits the wrong color temperature, or lacks the IP rating needed for outdoor installation. For commercial projects, a complete datasheet is also a basic procurement requirement, helping purchasing teams compare products on equal terms.

What You Will Find in a HansonLed LED Strip Datasheet

HansonLed produces a wide range of strips, including regular SMD strips, COB LED strip options, pixel addressable strips, high-efficiency tapes, and high-voltage rolls. Each datasheet is organized to give you the facts that matter most for that product family. The typical contents include:

• Product name and model number – identifies the exact strip variant and reel length.
• Input voltage – commonly 12V DC, 24V DC, 120V AC, or 220V AC depending on the series.
• Power consumption – usually shown in watts per meter, used to size the LED driver.
• LED type and density – for example, SMD 2835, SMD 5050, or COB chip-on-board, with LEDs per meter.
• Color temperature (CCT) – warm white (2700K–3000K), natural white (4000K), or cool white (6000K).
• Color Rendering Index (CRI) – important for retail, display, and photography lighting.
• Beam angle – typically 120 degrees for standard strips, narrower for lensed products.
• IP rating – IP20 for indoor use, IP65 for silicone-coated, IP67 for tube-encapsulated, or IP68 for submerged applications.
• PCB width and color – 5mm, 8mm, 10mm, or 12mm boards in white, black, or yellow.
• Cutting interval – tells you the minimum length you can cut without damaging the circuit.
• Operating temperature – helps determine suitability for cold storage, outdoor, or high-heat environments.
• Certifications – CE, RoHS, UL, PSE, and Reach marks that HansonLed carries on qualified products.

How to Request a HansonLed LED Strip Datasheet

HansonLed makes it easy to obtain documentation for any strip in its catalog. Follow these steps:

1. Visit the product page. Navigate to the LED strip section on hansonled.com, then select the subcategory that matches your project, such as COB, pixel, high-efficiency, or regular LED strip.
2. Find the specific model. Each product listing includes a detailed description and a specifications table. If a downloadable PDF is available, you will see a datasheet link near the product images or in the description area.
3. Contact the sales team. If the datasheet is not attached to the page, click the inquiry button or send an email to service@hansonled.com. Include the product name, model number, and your intended application so the team can send the most relevant document.
4. Use WhatsApp for urgent requests. For time-sensitive projects, message HansonLed at +86 13798338579. A support representative can share the datasheet or answer technical questions directly.
5. Request a sample. When in doubt, order a sample reel. HansonLed can ship a small quantity with the matching datasheet so you can verify brightness, color, and build quality before placing a bulk order.

How to Read the Key Parameters

Once you receive the datasheet, focus on the parameters that affect installation and performance. Start with input voltage and power per meter. Multiply watts per meter by the total length of your run to size the power supply, then add a 20 percent safety margin. For example, a 5-meter run of 10W/m strip requires at least a 60W driver.

Next, check the LED density and beam angle. Higher densities produce smoother, dot-free illumination, which is especially important for reflective surfaces or shallow channels. The COB LED strip range is designed specifically for applications where spotting must be eliminated.

Color temperature and CRI deserve close attention for retail, hospitality, and display work. A CRI above 90 renders colors accurately, while the right CCT sets the desired mood. Finally, match the IP rating to the environment. IP20 is fine for dry indoor cabinets, but outdoor signage, bathrooms, and kitchen environments need at least IP65.

Custom and OEM Datasheets

HansonLed accepts OEM and ODM orders, including custom PCB widths, special voltages, branded labels, and unique color temperatures. If you need a custom strip, the engineering team will prepare a tailored datasheet reflecting your exact specifications. This service is valuable for sign makers, lighting brands, and contractors who need a consistent product across multiple locations. Share your target lumen output, voltage, CCT, CRI, and IP requirement, and HansonLed will return a datasheet and sample plan.

Conclusion

A reliable datasheet is the foundation of every successful LED strip installation. Whether you need a standard 2835 tape, a high-density COB LED strip, or a programmable pixel strip, HansonLed provides clear technical documentation to support your design. As an experienced LED strip light manufacturer serving more than 80 countries, HansonLed combines factory-direct pricing, ISO9001 quality control, and 24-hour customer support. Request your datasheet today and move your project forward with confidence.