What is the hansonled led neon flex FAQ?
Sat 15,2026
Leave a message
If you are planning a signage, architectural, or decorative lighting project, you have probably come across LED neon flex. At HansonLed, we specialize in high-performance LED lighting solutions, and our neon flex led strip range is one of the most versatile products in our catalog. This FAQ answers the most common questions buyers ask before choosing HansonLed LED neon flex for commercial and residential applications.
What is LED neon flex?
LED neon flex is a flexible lighting product that mimics the bright, continuous glow of traditional glass neon, but uses modern LED technology encased in durable silicone or PVC. Unlike fragile glass neon tubes filled with gas, LED neon flex is shatterproof, energy-efficient, and easy to shape into letters, logos, curves, and architectural outlines.
What types of LED neon flex does HansonLed offer?
HansonLed offers a complete selection of neon flex products designed for different mounting and bending directions:
- Top View Neon Flex — emits light from the top surface and bends vertically, ideal for pillars, arches, and straight-line borders. Available in profiles such as 1010, 1313, and 1616.
- Side View Neon Flex — emits from the side and bends horizontally, perfect for custom signage, cursive lettering, and organic shapes.
- LED Flexible Wall Washer — washes large surfaces with smooth, even light for building facades and feature walls.
Is HansonLed LED neon flex suitable for outdoor use?
Yes. Many HansonLed neon flex led strip products carry IP65, IP67, or IP68 ratings, making them resistant to dust, rain, and moisture. The UV-resistant silicone housing also prevents yellowing or cracking after long-term sun exposure, which is why our neon flex is trusted for outdoor storefronts, building outlines, and landscape lighting in over 80 countries.
What voltage options are available?
HansonLed primarily recommends 24V LED neon flex for professional projects. A 24V system reduces voltage drop, allowing longer single runs with uniform brightness and lower heat generation compared with 12V systems. Lower operating current also extends the lifespan of the LEDs and silicone housing. Other voltage options may be available for specific product lines; please check the individual product page or contact our sales team.
Can I cut LED neon flex to custom lengths?
Yes. HansonLed LED neon flex is marked with designated cutting intervals, typically every 50mm or 100mm depending on the model. You should only cut along these lines to avoid damaging the internal circuit. After cutting, seal the ends with silicone end caps and neutral sealant, especially for outdoor or humid environments, to maintain the IP rating.
What colors and control options are available?
HansonLed offers LED neon flex in single colors, warm white, cool white, tunable white, RGB, RGBW, and addressable pixel options. RGB strips can mix millions of colors, while RGBW adds a dedicated white diode for purer whites and pastels. Addressable pixel neon flex allows each segment to be controlled individually, enabling chasing, fading, and programmable effects for dynamic signage and entertainment venues.
How long does LED neon flex last?
With proper installation and a suitable power supply, HansonLed LED neon flex typically lasts 30,000 to 50,000 hours. Using a 24V low-voltage system, keeping the strip within recommended run lengths, and ensuring adequate ventilation will help maximize service life.
How do I install LED neon flex?
Installation is straightforward, but hardwired commercial projects should always be handled by a licensed electrician. The general steps are:
- Plan the route and measure each required length.
- Cut only on the marked cutting lines.
- Seal cut ends with end caps and neutral silicone sealant for outdoor use.
- Mount using aluminum channels, clips, or adhesive backing as appropriate.
- Connect to a compatible 24V power supply and controller.
What certifications does HansonLed LED neon flex have?
HansonLed is a high-tech enterprise in Guangdong, China, with a 2,500 sqm factory and ISO9001 quality management certification. Our products carry CE, RoHS, UL, PSE, and Reach approvals, ensuring compliance with major markets including North America, Europe, and Japan. These certifications confirm electrical safety, environmental responsibility, and material safety for commercial projects.
Why choose HansonLed as your LED neon flex manufacturer?
With more than 13 years of production experience, HansonLed is a leading LED neon flex manufacturer serving customers in over 80 countries. We offer stable quality, OEM/ODM customization, 24-hour customer service, and direct factory pricing. Our strong R&D team supports custom sizes, colors, logos, and specifications, making us a reliable partner for signage companies, architects, and lighting distributors.
How can I get a quote or request samples?
You can browse the full LED neon flex catalog on our website and contact us by email at service@hansonled.com, by phone at +86-755-81707733, or via WhatsApp at +86 13798338579. Our team will provide product recommendations, quotations, and sample arrangements based on your project requirements.
