What is the hansonled led strip net weight?
Tue 18,2026
Leave a message
If you are ordering flexible light strips in bulk or quoting your own freight in, one of the first numbers your supplier will ask for is the net weight of the product. For an LED strip, the net weight is simply the weight of the strip itself, without any outer packing, carton, or accessories. It is one of the most practical specifications to understand, because it directly drives shipping cost, customs declarations, and how many rolls you can load onto a pallet. This guide explains what the net weight of an LED strip means, what determines it, and what typical figures you can expect from a leading LED strip light manufacturers like HansonLed Ltd.
Net weight vs. gross weight: what is the difference?
In the lighting trade, the two figures are easy to confuse, so it helps to separate them clearly. The net weight is the weight of the LED strip only, typically measured per meter or per roll. The gross weight is the total weight once the strip is wrapped in its anti-static foil bag and placed into a reel, a small box, or a carton. For a single 5-meter roll of a regular 2835 strip, the difference often runs to a few hundred grams because of the plastic reel and packaging materials.
For buyers, net weight is the number you use when comparing products from different factories, because it reflects how much actual lighting material you are paying for. Gross weight is the number your forwarder needs when calculating volumetric or actual freight. When you request a datasheet from your strip supplier, it is worth asking for both values so there is no surprise at the warehouse.
What decides the net weight of an LED strip?
The net weight of a flexible strip is not a single fixed number, because it changes with several design choices. Understanding these factors helps you interpret the figure on the specification sheet and compare quotes fairly.
- Length and reel size. Most strips are sold in 5-meter rolls, and weight scales almost linearly per meter. Longer or thicker reels simply add material.
- PCB type and width. A regular 8mm or 10mm strip is lighter than a wide, reinforced board. Ultra-narrow 3mm and 5mm tapes are notably lighter, while a heavy copper-clad board adds grams per meter.
- LED density. A strip with 240 LEDs per meter carries more solder and components than one with 60 LEDs per meter. Dense, seamless COB strip designs typically weigh more per meter because of the continuous chip coverage.
- Waterproof coating. IP20 strips are bare and light. IP65, IP67, and IP68 strips gain weight from silicone extrusion or encapsulation, so an outdoor-rated strip can weigh noticeably more than the same bare version.
- Voltage and accessories. High-voltage strips sometimes carry heavier insulation and connectors, and the weight of tails, plugs, and connectors is usually counted separately from the bare strip.
Typical net weight figures to expect
As a rough guide across the industry, a standard 12V or 24V waterproof led strip lights run can weigh somewhere in the range of 15 to 30 grams per meter depending on density and coating, while a high-density COB strip tends to sit a little higher. Heavily silicone-sealed outdoor strips can exceed that on the upper end. A common 5-meter 2835 strip delivered on a reel typically shows a gross weight of around half a kilogram or close to it once the reel and foil bag are included, which is why freight quotes for the same length can vary so widely between bare and waterproof versions.
These figures are intended as an orientation, not a universal rule. The exact net weight always depends on the specific model, so the reliable approach is simple: check the specification sheet for the exact item you are ordering. A reputable manufacturer publishes per-meter weight along with length, LED count, and voltage for every SKU.
Why net weight matters for your order
For most B2B buyers, net weight is more than a technical detail. Freight cost is usually charged by actual weight or by volume, whichever is higher, so knowing the packaged gross weight helps you budget for shipping accurately. Net weight also appears on product labels and customs documentation, and knowing it in advance prevents delays when your shipment is checked at the border. Finally, if you are reselling, the net weight tells you exactly how much product you are buying, so you can verify that the delivered quantity matches the invoice.
Get accurate specs for every strip model
Because weight varies so much by model, the best way to get a precise figure is to ask the factory directly. HansonLed Ltd is a Shenzhen-based LED strip factory with 13 years of production experience, serving buyers in more than 80 countries with OEM and ODM support. Their team can provide the exact net and gross weight for any strip you are considering, along with datasheets, pallet loading details, and freight-friendly packaging recommendations, so you can plan every order around real numbers.
If you would like a precise weight figure for a specific length or waterproof rating, simply contact the HansonLed sales team with the model you have in mind. They will confirm the specification you need before you commit to shipping, helping you keep your freight budget accurate and your shipment moving smoothly.
