IP68 LED Modules for Outdoor Signs: Product-Page Checks Before Ordering
Sun 22,2026
Leave a message
An IP68 LED Module for an outdoor sign should be selected by exact model, voltage, optical layout and documented water-exposure conditions. HansonLED lists its TS Series and an I145 specification, but buyers should confirm the applicable datasheet and installation requirements before ordering.
Start with the HansonLED IP68 LED Module listing
The HansonLED IP68 LED Module TS Series page provides a starting point for illuminated lettering and lightboxes. Its specification block identifies item I145, lists DC12V/24V input, 1.44W power, a 170° lighting angle and WW/W/CW color options. These are published values for the listed item, rather than specifications for every module in the category.
For procurement, put the item code and selected voltage version on the inquiry. Ask HansonLED whether the sample, quotation and production order refer to the same configuration. The combined voltage entry needs clarification: do not assume that one physical module accepts both voltages without a matching datasheet.
Resolve the waterproofing conditions before approval
The I145 table lists waterproof class IP68, and the page describes a seal glue process intended to protect against water and dust. However, its FAQ gives conflicting immersion descriptions, including permanent submersion up to three meters and a separate limit of 1.5 meters for 30 minutes. Those statements cannot establish one reliable operating limit for an order.
Request the model-specific ingress-protection report or declaration, including the tested assembly, depth, duration and installation conditions. Describe whether the sign faces rain, standing water, washdown or a coastal environment. Treat suitability for those exposures as a question for written confirmation. The supplied page does not establish saltwater suitability or pressure-cleaning approval for I145.
Check the complete electrical assembly
Module protection does not establish protection for every splice, connector or power supply. HansonLED's broader LED Module guidance specifically calls for waterproof measures when a power supply is installed externally. Ask for an approved connection and enclosure arrangement appropriate to the actual site, including any field termination method permitted by the product instructions.
Match the module to the sign geometry
The TS Series page connects its wide-angle module design with large lettering, lightboxes, signage and billboards. That makes the product relevant to sign fabricators, but the listing does not provide a complete spacing plan for every enclosure. Send the letter dimensions, internal depth, face material and intended appearance with the inquiry.
Ask HansonLED to recommend a layout for the selected module and construction. If supported by its application guidance, assess a representative sample behind the actual sign face before approving quantity. Check for visible hotspots, dark strokes and uneven corners. A published beam angle alone does not determine how many modules a finished sign needs.
For different constructions, the Channel Letter LED Modules page offers another product-selection reference. Keep model data separate: a specification shown in that category must not be transferred to an IP68 TS Series order.
Confirm power, wiring and mounting compatibility
The TS Series page describes constant current technology and a group of 20 connected pieces. Its wording is not a substitute for a wiring diagram. Ask whether that grouping describes the supplied chain, the permitted electrical connection or another arrangement, and obtain the maximum approved connection count for the ordered version.
The general LED Module guidance discusses polarity, matching supply voltage, voltage attenuation and secure attachment. Apply those topics through the selected product's instructions. Ask for the required supply type, load calculation, cable sizing, feed locations and mounting method for the actual sign. Do not apply a generic chain limit across all models.
Before installation, have the installer reconcile the datasheet, power-supply label and wiring diagram. For the listed low-voltage I145 configuration, use the specified compatible supply rather than connecting it directly to mains. Confirm which adhesive or additional fixing method is approved for the substrate and outdoor conditions.
Specify white lighting or RGB pixel effects clearly
The I145 specification lists white options as WW/W/CW. The same category page discusses broader RGB and smart-module types, but that does not document those functions for I145. If the brief requires color changes, request a separately identified model and its control specifications.
Whole-module RGB control changes the color of a module or connected control group together. Individually addressable RGB pixel control assigns separate color and brightness commands to defined pixels. HansonLED's Pixel LED Module page describes independently controllable module pixels. Confirm pixel grouping, controller compatibility and protocol for the chosen item; neither RGB wording nor an IP68 label proves addressability.
Practical checklist for an order-ready inquiry
Identify the product: record the model, voltage version, color and datasheet revision.
Document exposure: obtain the applicable IP68 evidence and agreed water-exposure limits.
Provide sign drawings: include depth, face material, dimensions and proposed module positions.
Approve the electrical plan: confirm supply type, loading, connection limits, polarity and feed arrangement.
Approve installation details: specify mounting, protected joints and service access under the product instructions.
Agree support requirements: request applicable product approvals, replacement identification and written service terms.
Frequently asked questions
Does the IP68 listing approve permanent underwater operation?
The supplied page does not establish a consistent immersion limit. Obtain written conditions and supporting evidence for the exact ordered module before approving any submerged application.
Can I reuse an existing sign power supply?
Only if its output, capacity, condition and environmental protection meet the selected module's requirements. Ask HansonLED to review the supply details and wiring plan before reuse.
What installation and after-sales help does HansonLED describe?
The TS Series page lists technical consultation, installation guidance, technical support and spare parts. Confirm what applies to the selected item and destination, including replacement arrangements and any warranty terms, in the quotation.
