12V vs 24V LED Modules for Channel Letter Retrofit Projects
Sun 22,2026
Leave a message
Choose a HansonLED LED Module by its specified input voltage, optical fit and installation requirements. A 12V retrofit may retain compatible existing equipment; a 24V design requires matching components throughout. HansonLED documents both voltage options, but voltage alone does not establish brightness, efficiency or suitability for a particular channel letter.
Which HansonLED LED Module options support the comparison?
The HansonLED channel letter range lists square, mini and lens-equipped module options. Its specification table identifies the white I92 as DC12V. The separate 24V LED Module range identifies the white I57-24V as DC24V. These are starting points for a shortlist, rather than equivalent products differentiated only by voltage.
For color-changing projects, the RGB LED Module page lists I110 with DC12V/24V input options. Confirm the ordered voltage version before specifying a replacement supply. A category table showing two voltages should not be treated as confirmation that every supplied unit accepts both.
12V versus 24V: make the decision around the existing sign
When retaining 12V deserves consideration
If the existing sign has a serviceable 12V DC supply, a suitable 12V module can be considered after checking supply capacity, output stability, wiring condition and the selected module's requirements. Reusing equipment should depend on inspection and compatibility, rather than the original sign having worked previously. HansonLED's general module guidance specifically calls for matching supply and module voltage labels.
When evaluating a 24V redesign
A 24V option deserves evaluation when the retrofit includes replacement power equipment or a revised cable layout. As a general electrical principle, equal power at a higher voltage requires less current; whether this improves the actual installation depends on cable resistance, load distribution and the product design. Obtain model-specific wiring limits before choosing cable sizes or extending branches.
Do not interpret 24V as an automatic improvement in light output or energy efficiency. Compare candidate modules using confirmed electrical and optical data at the required sign-face appearance. HansonLED's published category information does not establish a controlled, equivalent-output comparison between I92 and I57-24V.
Match the module to the letter cavity
HansonLED's channel letter listings include Mini LED Module 1 LED, Mini LED Module 2 LED With Lens and other configurations. Their presence gives buyers several formats to investigate, but the category names do not establish the dimensions or layout required for a particular letter. Request the selected model's drawing before approving placement in narrow strokes or around internal corners.
For either voltage, assess letter depth, face material, internal finish and the distance between the module and face. Subject to the actual datasheet, use a representative letter sample to assess spacing and optical coverage. Review hotspots, shadows and consistency across narrow and wide strokes before ordering the full quantity. This is a proposed project acceptance step, not a reported HansonLED test result.
Plan power distribution and environmental protection
HansonLED's general module instructions discuss polarity, voltage attenuation and secure cable connections. Apply those principles through the selected model's wiring diagram. Confirm the permitted modules per branch and feed arrangement; do not transfer a generic category-page connection limit to every product.
Where qualified personnel perform commissioning, check the supply output and voltage at the farthest loaded module against the permitted input range. If a branch appears dim, investigate connections, loading and voltage drop before changing the supply setting. HansonLED's guidance warns against casually adjusting the power supply voltage.
The same guidance distinguishes module protection from power-supply protection and calls for waterproof measures where an external supply needs them. Specify the module, connectors, cable entries and supply enclosure for the actual exposure. A protection rating on one component does not establish protection for the completed sign. Use the selected product's approved mounting and sealing instructions, and isolate power before installation or service.
Keep RGB control separate from pixel control
Specify whether the sign needs synchronized color changes or independently controlled pixels. With conventional whole-module RGB control, connected modules on the same controlled channels change together. Independently addressable RGB pixel control requires compatible data control as well as suitable power distribution; an RGB label alone does not establish addressability.
HansonLED's Pixel LED Module page explicitly describes independently controlled module pixels. Confirm the selected model's protocol, addressing unit, controller compatibility and wiring requirements. Do not assume that every LED inside a module is separately addressable, or that changing voltage adds animation capability.
Practical retrofit purchasing checklist
Record the sign: document cavity dimensions, face material, existing equipment labels and cable routes.
Identify the exact module: confirm model code, voltage version, dimensions, color and optical requirements.
Approve electrical compatibility: check supply capacity and loading allowances against the relevant datasheets.
Approve distribution: obtain branch limits, cable requirements, connection details and any controller requirements.
Check exposure and mounting: confirm suitable protection and fastening methods for all installed components.
Accept a sample layout: assess the illuminated face before releasing the complete module order.
Prepare maintenance records: retain the approved layout, model details and replacement component references.
Frequently asked questions
Can I keep the existing supply when replacing modules?
Possibly, if its voltage, capacity, condition and protection meet the selected module's requirements. A 12V supply should not be assumed suitable for a 24V module. Have compatibility confirmed before reuse.
Will 24V eliminate dim modules at the end of a branch?
No voltage choice guarantees that result. Cable resistance, connections and branch loading still matter. Follow the selected module's distribution limits and verify performance under the intended load.
What should I send HansonLED for selection support?
Send the letter drawing, cavity depth, face details, installation environment, existing supply information and desired lighting effect. HansonLED's channel letter page describes technical consultation, installation guidance and after-sales technical support. Ask for a model-specific recommendation and supporting documentation before purchasing.
